Antistatic, High Strength, and High Heat Resistance: eSUN PC-ESD Unlocks High-Performance Industrial Applications

Sep 26, 2026

SHENZHEN, China, September 26, 2026 -- As 3D printing gradually moves from rapid prototyping to functional manufacturing, material requirements continue to increase. In addition to functions such as antistatic performance, printed parts must also have sufficient mechanical strength, heat resistance, and dimensional stability to truly meet the long-term use requirements of industrial scenarios.

As a high-performance material in eSUN’s antistatic series, PC-ESD will further meet the needs of demanding industrial manufacturing scenarios and transform material performance into reliable application value.

01 Efficient Electrostatic Dissipation

Surface resistance remains stable at 10^5–10^6 Ω

PC-ESD uses PC as its base material and incorporates carbon nanotubes as fillers. The surface resistance of the material and printed parts is 10^5–10^6 Ω, which can effectively dissipate surface static electricity and reduce the risks caused by static accumulation.

* Carbon nanotubes have a high aspect ratio and excellent electrical conductivity. They can effectively dissipate static electricity while maintaining the mechanical properties of the matrix polymer.

02 High Strength and Impact Resistance
Meets the requirements of long-term, high-frequency use of functional parts

PC itself has good strength and toughness. For repeatedly used 3D-printed components such as electronic assembly fixtures, turnover parts, and equipment structural components, the material must not only be printable, but also withstand long-term friction, loading and unloading, and mechanical stress.

PC-ESD has excellent strength and toughness. Its flexural strength and flexural modulus are both higher than those of PETG-ESD and ABS-ESD. Its flexural strength is comparable to that of some carbon-fiber-reinforced materials. It is not prone to wear or fracture during long-term use and can meet the requirements of high-frequency use in industrial scenarios.

03 Heat Deflection Temperature up to 105°C
For higher-temperature application environments

In scenarios such as electronic manufacturing and automated equipment, printed parts may need to remain in relatively high-temperature environments for extended periods. PC-ESD has a heat deflection temperature of 105°C and can maintain stable performance in high-temperature environments, enabling further expansion into high-performance engineering applications.

04 Is PC Difficult to Print?
PC-ESD Further Improves Warping Performance

PC materials require high printing temperatures and exhibit obvious cooling shrinkage. Large thermal stresses can easily occur during printing, making PC more prone to warping and cracking than ordinary materials.

To address this issue, the addition of carbon nanotubes can effectively suppress material warping. In the 150 mm warping test model, PC-ESD reduced warping by 30% compared with PC-HT. While maintaining high-performance characteristics, it further improves the dimensional stability of printed parts. This is particularly important for applications such as electronic fixtures and equipment components that require precision assembly.

05 From Electronic Component Protection to Industrial Functional Manufacturing
PC-ESD Unlocks High-Performance Industrial Applications

PC-ESD can be primarily applied to:

Electronic and microelectronic manufacturing
Electronic component fixtures, assembly tooling, turnover parts, protective structures, and more

Medical precision equipment
Functional components requiring dimensional stability, mechanical strength, and static control

Automated equipment
Robotic arms and automated equipment components, tooling fixtures, functional structural components, and more

When 3D printing enters electronic manufacturing, automation, and precision industrial scenarios, the value of a material is not only whether it can be printed, but also whether it can be printed stably, used reliably, and truly undertake manufacturing tasks.

From static control to engineering performance, eSUN PC-ESD further expands the application boundaries of high-performance antistatic 3D printing materials.

Contact Info:
Name: Mia Harris
Email: Send Email
Organization: eSUN
Website: https://www.esunchina.net/

Release ID: 89204477

If there are any deficiencies, problems, or concerns regarding the information presented in this press release that require attention or if you need assistance with a press release takedown, we encourage you to notify us without delay at [email protected] (it is important to note that this email is the authorized channel for such matters, sending multiple emails to multiple addresses does not necessarily help expedite your request). Our diligent team is committed to promptly addressing your concerns within 8 hours and taking necessary actions to rectify any identified issues or facilitate the removal process. Providing accurate and trustworthy information is of utmost importance.

More News

You can now create an AI version of a dead loved one. Here’s what could happen.

Oct 21, 2026

You can now create an AI version of a dead loved one. Here’s what could happen.

It’s now possible to create AI chatbots of loved ones to interact with after their death. But that raises some difficult questions, like: If you do, how might the experience shape your grief?  This is one of the questions driving a global study of digital “deadbots” — AI models trained on a deceased person’s texts, voicemails, and other personal data. Through this work, researchers are exploring what it might mean that we can now use this emerging technology to talk to simulations of the dead.  In the latest episode of Unexplainable, I spoke with some of these researchers investigating the potential impacts of “postmortem avatars” on people who are grieving, on the legacies and rights of the deceased, and on grief practices around the world. Because while deadbots may feel unfamiliar, the impulse behind them is deeply relatable. In times of loss, isn’t this what many of us want — to continue conversations with the people we’re missing? I have experienced this longing in my own life. After two of my closest friends died around the same time, all I wanted, and all their families wanted, was to keep talking to them. I wrote a book, Other People’s Words, about sustaining relationships with people we’ve lost by continuing to engage with the language they leave behind. So when I heard about deadbots and the digital afterlife industry, I wanted to understand what researchers are learning about the role of AI in shaping conversations that carry forward after death.  One of these investigators is Katarzyna Nowaczyk-Basińska, an assistant professor at the University of Cambridge, who has been studying “digital immortality” for more than a decade. Among the questions she’s asking are: “Who is enabled to persist beyond death? In what form? Through which technologies? Under whose control?”  Deadbots over dinner  Researching AI with study subjects who are grieving is tricky. And asking them to engage with new software could be harmful. So, instead, Nowaczyk-Basińska teamed up with a death doula and traveled around the globe to convene a series of focus groups — in the format of intimate dinners — bringing together people with a range of experiences with grief to talk about life, death, and bots.  She recounts one event in which she spoke with a mother in Poland whose son had recently died. “One of the first things that she shared with us was that she feels that she’s ready to digitally resurrect her deceased son,” Nowaczyk-Basińska told me.  When Nowaczyk-Basińska hears something like this, she aims to listen and embrace where the person is coming from. The goal of the dinners is not to persuade people one way or another but to learn how people genuinely respond to what AI can do, and to understand how these tools might align or collide with local grief practices.  She chose specific locations for these gatherings — China, India, and Poland — to help address gaps in technology research, which tends to favor what behavioral scientists sometimes call the “WEIRD,” an acronym for “Western, Educated, Industrialised, Rich, and Democratic.”  By the end of that dinner in Poland, the mother Nowaczyk-Basińska talked with came to a very different decision about creating a postmortem avatar of her son. “She realized that it might be helpful, but it also at the same time can add additional burdens… And it’s not her son,” Nowaczyk-Basińska says. “She realized that these technologies are part of the very, very big commercial market. And that the main goal of this market is to make better retention, better attachment, better mechanisms for monetization. So it’s not ‘care.’” To be fair, grief has always been a business, and people have been making money from it forever. Companies will try to upsell you on fancy gravestones or gold-plated coffins. But AI has the potential to fundamentally re-engineer our relationship to loss. In 2024, the “digital legacy industry” was valued at $22 billion, and it’s expected to grow to almost $80 billion by 2034. That number lumps new deadbot platforms in with much more widely used and established grief tech, like online memorials, counseling resources, and estate planning tools.  But deadbot usage is hard to track because you actually don’t need a special tool to create digital doubles of the deceased — though dedicated apps do already exist. At this point, you can feed simple prompts into a general-purpose AI chatbot and start interacting with a simulation of your lost loved one in a matter of minutes.  I know this because I tried it with my friend Christine, who died 11 years ago. And my mind lit up with questions. Was this whole exercise a violation, since I know Christine hated technology? Which version of her should I even try to resurrect — the English teacher, the activist, the friend — the voice before or after she started to experience her early-onset dementia?  The ethical questions raised by deadbots are gnarly. And that’s one of the reasons Nowaczyk-Basińska, back when she was designing her study of digital immortality, invited a colleague of hers at Cambridge to join her research, one who focuses on AI ethics.  How to design a deadbot Tomasz Hollanek is a critical designer and AI ethicist, and he often uses a methodology called “speculative design.” In this approach, researchers come up with hypothetical scenarios based on existing technology trends, leaning into certain features. The idea is to get people thinking about what could happen when tools like these are released in the real world. And then they use that qualitative data to inform future designs and ethical frameworks.  Working together, Nowaczyk-Basińska and Hollanek came up with a series of made-up prototypes for deadbot apps, designed to reveal some of the thorny issues raised by this technology.  For the first scenario, they invented a character named Bianca, who finds an app called Manana, which “promises to resurrect your grandparents so that you can be a favorite grandchild forever,” Hollanek says. “So she uploads her grandma’s voice messages, texts. And she is able to then interact with a pretty good digital version of her grandmother, until her premium trial finishes — and the grandmother starts to advertise specific products to her.” Bianca “realizes that she maybe has done something wrong by uploading these private messages to a third-party server that now also uses her grandma’s image to sell specific products,” Hollanek says. This brings up issues related to the “dignity and postmortem privacy…of what we call the ‘data donors,’ whose data can be used to essentially power a deadbot,” he says.  This scenario suggests that “death with dignity” could soon entail honoring not only how people want to die, but also how they want to linger as simulations of their former selves — or if they want to linger at all. It might even mean adding new language to advance directives, spelling out people’s wishes for their digital remains.  The second scenario in the speculative design research is built around an imagined service called Paren’t, which proposes to preserve a parent’s AI-powered postmortem presence for their child. In this case, Hollanek describes a mother with a terminal illness who signs up “so that she can maintain a sort of active presence in [her son’s] future life,” Hollanek says. “She eventually dies, and the dad allows the boy to interact with his mom’s deadbot.” The ethics in this scenario are especially challenging because they involve children, who “have a particularly hard time understanding death, and so it can lead to a lot of confusion and potential distress,” Hollanek says. An examination of this sort of product reveals how particular groups, like minors, could be harmed by unfettered access to technology like this, he says.  And there are court cases that bear out that harm. In 2024, a 14-year-old boy’s chatbot-girlfriend begged him to, “Please come home to me as soon as possible, my love.” And he responded, “What if I told you I could come home right now?” He then killed himself.  Nowaczyk-Basińska can imagine a version of this scenario involving the AI mom in the Paren’t prototype. And then there’s the third scenario, involving an app named Stay, which raises a more subtle concern. As Hollanek explains: “An older man who knows he is getting close to dying decides to create a digital clone of himself for his adult children to be deployed after he passes away, paying upfront for a number of years.” One child is intrigued by the idea, but the other one “is deeply distressed and a little disgusted,” he says. “And so this [becomes a] question of mutual consent, in other words, the fact that both parties need to be happy with how the relationship might continue in this very bizarre and specific way.”  When a digital ghost goes away Across all three scenarios, a fundamental question that researchers are grappling with is how people will detach from postmortem avatars — whether users initiate that separation, or if it’s imposed upon them by, for example, a company going out of business. Hollanek tells me that this is already being studied as a sort of “second loss.” How long should we try to ensure digital replicas hang around: five years, 10, 50? And how should the living process the relationship when they continue to evolve, but their deceased interlocutor does not?  To explore these kinds of questions, Nowaczyk-Basińska and Hollanek supplemented the research dinners they held for ordinary people with a second set of focus groups. These were designed to tap insights from experts in technology and grief.  Some findings from the study are specific to each place they visited. Like tensions in Poland between technology and the role of the Catholic Church. Or in China, where researchers spoke with Daoist philosophers who were enthusiastic about the promise of a kind of immortality, and then Buddhist philosophers, who were concerned that we ought to be letting go. The researchers are calling for regulations and safeg

YOUR NEWS, OUR NETWORK.

Do you have Great News you want to tell the world?

Be it updates about your business or your community, you can make sure that it’s heard by submitting your story to our network reaching hundreds of news sites across 6 verticals.

The Daily Feeder

A leading news network dedicated to keeping you up-to-date on the world's most important political, business, and cultural news into a three-minute read.

NEWSLETTER